Filter
Top Products
5
To hire an authorized service technician to
assemble the weight bench, call toll-free
1-800-445-2480.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly may require the following tools (not
included):
• two adjustable wrenches
• one rubber mallet
• one standard screwdriver
• one Phillips screwdriver
• lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
ASSEMBLY
1.
Press two 56mm Round Outer Caps (14) onto the
Front Stabilizer (1).
Attach the Front Stabilizer (1) to the Front Leg (2)
with two M8 x 67mm Carriage Bolts (21) and two
M8 Nylon Locknuts (18). Make sure the indents
in the Stabilizer and the decal on the Front Leg
are in the positions shown. Do not tighten the
Locknuts yet.
1
2
18
18
21
Name
Decal
Indents
1
14
14
Before assembling this product, make sure
that you understand the information in the
box above.