Filter
Top Products
10
8. Raise the Frame (67) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (87) so that the large
b
arrel and the latch knob are in the positions
shown.
Attach the upper end of the Storage Latch (87)
to the bracket on the Frame (67) with a 3/8" x 1
3/4" Bolt (3) and a 3/8" Jam Nut (7).
Attach the lower end of the Storage Latch (87) to
the bracket on the Base (103) with a 3/8" x 2"
Bolt (4) and a 3/8" Jam Nut (7). Note: It may be
necessary to move the Frame (67) back and
forth to align the Storage Latch with the bracket.
Lower the Frame (67) (see HOW TO LOWER
THE TREADMILL FOR USE on page 20).
7
7
Large
Barrel
103
4
67
3
87
8
10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place; one of the hex keys is used to adjust the walking belt (see pages 22 and 23). To protect
the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.
9. With the help of a second person, raise the
front of the treadmill and insert the crossbar on
the Base (103) into the cutout in the cardboard
stand as shown. Have the second person
hold the treadmill to prevent it from moving
forward or backward.
Firmly tighten the four 3/8" x 3 3/4" Patch Bolts
(5).
With the help of the second person, lower the
treadmill off the cardboard stand.
Cardboard
Stand
5
103
5
9
Latch
Knob