HOW TO USE THE STEREO SOUND SYSTEM
This product has been designed specifically to work
w
ith iPod and has been certified by the developer to
meet Apple performance standards. To play music or
a
udio books through the consoleʼs stereo speakers,
you must connect your iPod, CD player, or personal
audio player to the console through the audio jack or
through the Integrated Universal Dock for iPod.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the Start button. Then, plug
the audio wire into a jack on your MP3 player, CD
player, or personal audio player. Make sure that the
audio wire is fully plugged in.
To use the Integrated Universal Dock for iPod, locate
the iFIT Universal iPod Connector. Plug one end into
the Integrated Universal Dock for iPod near the Start
button and the other end into your iPod. Make sure
that the iFIT Universal iPod Connector is fully
plugged in.
Next, press the Play button on your iPod, CD player, or
personal audio player. Adjust the volume on your iPod,
CD player, or personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE INFORMATION MODE
The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilome-
ters, and to turn on and off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The display will show
the total number of
hours the treadmill has
b
een used.
The display will also show the total number of miles (or
kilometers) that the walking belt has moved.
The word “English” for miles or “Metric” for kilometers
will appear in the display. Press the Speed increase
button to change the unit of measurement if desired.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, the word “On” will appear in the display
while the information mode is selected. To turn on or off
the demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.
18