Filter
Top Products
11
11. Have a second person hold the console assem-
bly near the Right Upright (79).
Connect the Upright Wire (86) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER.
Then, remove the wire tie from the Upright Wire
(86). Insert the connectors and the excess wire
into the Right Handrail (105).
Set the console assembly on the Right Handrail
(105) and the Left Handrail (not shown). Be
careful not to pinch the wires.
79
Console
Assembly
11
86
Console
Wire
Wire Tie
105
10. Remove the tie from the bracket on the Left
Handrail (101).
Attach the Left Handrail (101) to the Left Upright
(77) with three 5/16" x 3/4" Bolts (4) and three
5/16" Star Washers (9); do not fully tighten
the Bolts yet.
4
4
9
101
Tie
77
10
Console
Wire
86
9. Remove the tie from the bracket on the Right
Handrail (105).
Have a second person hold the Right Handrail
(
105) near the Right Upright (79).
Insert the Upright Wire (86) into the bottom of
the Right Handrail (105) and pull it out of the
h
ole in the top of the Right Handrail.
Attach the Right Handrail (105) to the Right
Upright (79) with three 5/16" x 3/4" Bolts (4) and
three 5/16" Star Washers (9); do not fully
tighten the Bolts yet. Be careful not to pinch
the Upright Wire (86).
86
79
4
Hole
4
105
9
9
Tie