Filter
Top Products
14
USER SETTING MODE
1. Press the MODE/SET key until you have reached the SETTING
mode which will have a banner showing USER displaying
SETUP
2. Press and hold the MODE/SET button for around 3 seconds to
enter into configuring the user setting
3. The first setting is the unit in which you wish your measurements
to be measured and recorded in. There are two options which is
the combination of CM for height and KG for weight or IN for
height and LB for weight which can be manipulated by press
the LAP/SAVE/- or ST/SP/+ button
4. Press MODE/SET key to confirm. The next setting is gender and
this again can be selected by scrolling through the sexes via the
ST/SP/+ or LAP/SAVE/ - button
5. Press MODE/SET key to confirm and set your age. To increment
the age, press the ST/SP/+ button and to decrement the age,
press the LAP/SAVE/ - button
6. Confirm by pressing MODE/SET key and to increment the weight,
press the ST/SP/+ button and to decrement the weight, press the
LAP/SAVE/ - button
7. Confirm by pressing MODE/SET key and to increment the height,
press the ST/SP/+ button and to decrement the height, press the
LAP/SAVE/ - button
8. To exit the setting mode, press and hold the MODE/SET key for
around 3 seconds or wait for one minute when it will automatically
exit the mode itself but previous settings will remain unchanged