Filter
Top Products
6
1.
Remove the two M10 x 120mm Patch Screws
(58) and the shipping bracket (not shown)
attached to the front of the Frame (1). Discard
the shipping bracket. Do not discard the two
M10 x 120mm Patch Screws.
Orient the Stabilizer (49) with the Wheels (8) in
the position shown. While a second person tips
the Frame (1) backward, attach the Stabilizer to
the Frame with the two M10 x 120mm Patch
Screws (58).
2. Identify the Right Handlebar (36), which is
marked with an “R” sticker, and orient it as
shown. Attach the Right Handlebar to the Frame
(1) with three M6 x 18mm Patch Screws (57).
Repeat this step to attach the Left Handlebar
(22).
58
49
1
2
1
1
8
8
22
57
36
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.