Filter
Top Products
12
11. See steps 4 and 5. Tighten all Screws used in
these steps.
Attach the Left Accessory Tray (101) and the
Right Accessory Tray (104) to the console as-
sembly with eight #8 x 1/2" Screws (1).
104
1
1
101
1
1
11
Console
Assembly
10. Set the console assembly on the Left and Right
Uprights (82, 83). Be careful not to pinch any
wires. Insert the excess wire into the Right
Upright.
Start two 5/16" x 3/4" Screws (5) with two 5/16"
Star Washers (9) into the Right Upright (83).
Then start a 5/16" x 1 1/2" Bolt (4) into the Right
U
pright.
Repeat this step on the left side of the tread-
mill. Then, firmly tighten all four 5/16" x 3/4"
Screws (5) and both 5/16" x 1 1/2" Bolts (4).
10
5
83
4
82
4
9
9
5
Console
Assembly