Filter
Top Products
9
10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill.
8. Attach the Storage Latch (29) and the Latch Spacer (44)
to the left Upright (69) with two 3/4” Screws (2) as shown.
Do not overtighten the Screws.
2
69
29
44
48
42
G
round
Wire
36
34
47
7. Press the Upright Wire (42) into the slot in the underside
of the Console Base (47) in the indicated area. Cover the
U
pright Wire with the Right Grip Plate (36). B
e careful
not to pinch the Upright Wire. Tighten two 1/2” Screws
(
48) and a 3/4” Screw (2) into the Right Grip Plate and
the Console Base.
Attach the Left Grip Plate (34) over the ground wire and
the other wires with two 1/2” Screws (48) and a 3/4”
Screw (2).
Be careful not to pinch any of the wires.
48
S
lot
7
8
9. Set the 2-Pound Weights (107) and 3-Pound Weights
(108) onto the weight rack as shown.
107
107
108
9
2
2