Filter
Top Products
12. See the lower drawing. Position the Uprights
(53, 54) so that the treadmill Frame (51) is cen-
tered between the Uprights.
See steps 2, 5, and 6. Firmly tighten the two
Colored Patch Frame Bolts (1) and the four
Upright Bolts (2). Be careful not to overtighten
the Colored Patch Frame Bolts.
With the help of a second person, Carefully
raise the Uprights (53, 54).
12
2
51
1
53
51
54
Top View
10. Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with a
G
round Screw (84).
52
39
G
round Wire
1
0
84
Hole
10
11. Tighten two Belly Pan Screws (20) into the Belly
Pan (66) and the Hood (65).
Be careful not to
overtighten the Belly Pan Screws.
65
20
11
20
66