Filter
Top Products
12
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The left display will show the
total number of hours that
the treadmill has been used
and the total number of
miles (or kilometers) that the
walking belt has moved.
An “E” (for English) or an “M”
(for metric)
will appear in the
right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
IMPORTANT: If a “d” ap-
pears in the right display, the
c
onsole is in the “demo”
mode. This mode is intended
t
o be used only when a
treadmill is displayed in a
store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the displays will remain lit, al-
though the buttons will not operate. If a “d” appears
when the information mode is selected, press the
Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the
console.