ProForm PFTL16011.0 Treadmill User Manual


  Open as PDF
of 40
 
7
1. Make sure that the power cord is unplugged.
Attach the Left Wheel Cap (103) to the Base
(105) with two #8 x 3/4" Screws (2).
Attach the Right Wheel Cap (not shown) to
the right side of the Base (105) in the same
way.
1
103
105
2
ASSEMBLY
• Tohireaservicetechniciantoassemblethis
product in your home, call 1-800-445-2480.
• Assemblyrequirestwopersons.
• Placeallpartsinaclearedareaandremovethe
packing materials. Do not dispose of the packing
materialsuntilyounishallassemblysteps.
• Theundersideofthewalkingbeltiscoatedwith
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
• Toidentifysmallparts,seepage6.
• Assemblyrequiresthefollowingtools:
the included hex key
one adjustable wrench
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
 previous next