Filter
Top Products
8
9. Identify the Left Handlebar (8) and the Left Upper Body
Arm (11), which are marked with stickers.
Orient the Left Handlebar (8) and the Left Upper Body
Arm (11) as shown. Insert the Left Handlebar into the
Left Upper Body Arm. Attach the Left Handlebar with two
M8 x 43mm Button Bolts (78) and two M8 Jamnuts (79).
Make sure that the Jamnuts are in the hexagonal
holes in the Left Upper Body Arm.
Attach the Right Handlebar (9) to the Right Upper Body
Arm (12) in the same way.
9
11
8
9
12
78
78
79
79
7. The Console (5) requires four 1.5V “D” batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the ellipical exerciser has been
exposed to cold temperatures, allow it to warm to
room temperature before inserting batteries into the
Console. If you do not do this, the console displays
or other electronic components may become dam-
aged. Press the two tabs on the battery cover, and
remove the battery cover. Next, insert four batteries into
the Console. Make sure that the batteries are orient-
ed as shown by the diagrams inside of the battery
compartments. Then, reattach the battery cover to the
Console.
Battery
Cover
Batteries
Tabs
7
5
8. While another person holds the Console (5) near the
Upright (3), connect the wire harness on the Console to
the Upper Wire Harness (48). Insert the excess wire
harness into the Upright. Next, attach the Console to
the Upright with four M4 x 16mm Round Head Screws
(101). Be careful to avoid pinching the wire har-
ness.
48
5
3
101
Wire
Harness
8