ProForm Crosswalk 397 Treadmill User Manual


  Open as PDF
of 28
 
12
12
12. Attach the Latch Housing (67) with the Latch
Spacer (82) to the Left Upright (66) with two #10
x 1 1/2" Screws (8); make sure that the knob is
on the indicated side. Start both Screws, and
then tighten them. Be careful not to over-
tighten the Screws.
13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plas-
ticonthetreadmilldecals,removetheplastic.Toprotecttheoororcarpet,placeamatunderthetreadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 21 and 22).
67
82
8
Knob
 previous next