Filter
Top Products
HOW TO USE I-FIT.COM CDÕS AND VIDEOS
To purchase i-Fit.com CDÕs and videos (not included),
call toll-free 1-800-735-0768.
To use i-Fit.com CDÕs, you must first connect the
treadmill to your home stereo, portable stereo, or
computer with CD player. To do this, follow steps A
to D below.
A. Plug one end of the in-
cluded audio cable into
the jack near the tread-
mill power cord. Make
sure that the audio
cable is fully plugged
in and that it is not
wrapped around the
power cord.
B. To connect the tread-
mill to a home stereo,
plug the other end of the
audio cable into the in-
cluded adapter and plug
the adapter into a LINE
OUT or an AUDIO OUT
jack on the stereo.
C. To connect the tread-
mill to a portable
stereo, plug the other
end of the audio cable
into a LINE OUT or an
AUDIO OUT jack on the
portable stereo.
D. To connect the tread-
mill to a computer, plug
the other end of the
audio cable into a LINE
OUT or an AUDIO OUT
jack on the computer.
Note: Depending on the model of your stereo or com-
puter, the jacks may be labeled differently. You may
need to connect the audio cable to a SPEAKER jack or
a HEADPHONE jack. To do this, you must purchase a
Y-adapter at your local electronics store. CAUTION:
You must be able to listen to the audio through
speakers or headphones in order to use i-Fit.com
CDÕs or videos.
To use i-Fit.com videos, you must connect the tread-
mill to your VCR or TV. To do this, follow steps A to C
below.
A. Plug one end of the in-
cluded audio cable into
the jack near the treadmill
power cord. Make sure
that the audio cable is
fully plugged in and that
it is not wrapped
around the power cord.
B. To connect the treadmill
to a VCR, plug the other
end of the audio cable
into the included adapter
and plug the adapter into
an AUDIO OUT jack on
the VCR.
C. To connect the tread-
mill to a TV, plug the
other end of the audio
cable into the included
adapter and plug the
adapter into an AUDIO
OUT jack on the TV.
Note: If your VCR is connected to a home stereo, you
may connect the audio cable to the home stereo as
described in step B at the left. Remember, you must
be able to listen to the audio through speakers or
headphones in order to use i-Fit.com CDÕs or
videos.
When the audio cable is properly connected, make
sure that the on/off switch near the treadmill power
cord is in the on position. Next, make sure that the
power cord is properly plugged in. Follow the steps
below to use an i-Fit.com CD or video.
Insert the key fully into the console.
When the key is
inserted, the four dis-
plays and various indica-
tors on the console will
light.
1
VIDEO AUDIO
OUT
IN
Adapter
Audio
Cable
LINE OUTPHONES
Audio
Cable
LINE OUT
Audio
Cable
Audio
Cable
VIDEO AUDIO
OUT
IN
Adapter
Audio
Cable
VIDEO AUDIO
OUT
IN
Adapter
Audio
Cable
Audio
Cable
12