Filter
Top Products
6
100
99
82
5. Remove the backing from the Wrench Clip (99). Press
the Wrench Clip onto the base of the right Upright (82)
as shown. Press the Allen Wrench (100) into the
Wrench Clip.
6. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a
mat under the treadmill.
5
4. With the help of a second person, carefully tip the
Uprights (82) down as shown. Make sure the Extension
Legs (103) remain inserted into the Uprights. Attach
one of the Extension Legs with two of the four Short
Screws (101) as shown. Attach the other Extension Leg
in the same way.
Tighten a Handrail Bolt (78) with a Handrail Washer (96)
into the right Upright (82) and the lower end of the right
Handrail (75) as shown. Note: Refer to drawing 4b. To
align the hole in the Handrail (75) with the hole in the
Upright (82), it may be necessary to have a second per-
son place one foot on the treadmill as they lift the
Handrail. Insert the Handrail Bolt when the holes are
aligned.
Next, tighten a Handrail Bolt (78) with a Handrail Washer
(96) into the left Upright (82) and the lower end of the left
Handrail (not shown).
With the help of a second person, carefully tip the
Uprights (82) back to the upright position.
4
101
96
78
101
82
96
78
103
101
101
103
82
75
4b
75
82