Filter
Top Products
6
2
. Remove the knob from the pin. Make sure that the collar
and the spring are on the pin.
Insert the pin into the Left Bottom Handgrip (43), and
t
ighten the knob back onto the pin.
Place the treadmill in the storage position (see HOW TO
FOLD THE TREADMILL FOR STORAGE on page 21).
4
3
Pin
Collar
Knob
Spring
2
3. Have a second person hold the Uprights (97).
Orient the U-base (89) so the Base Pads (99) are un-
derneath it, and position the U-base against the base of
the Uprights (97) as shown. Insert two 1 3/4” Bolts (76)
with Washers (71) into the base of the Uprights and the
U-base; if necessary, tip the Uprights forward as you in-
sert the Bolts. Finger tighten the Bolts.
Next, insert two 3” Bolts (86) into the U-base (89) and
the base of the Uprights (97); if necessary, tip the
Uprights forward as you insert the Bolts. Finger tighten
two Nuts (20) with Washers (71) onto the Bolts.
Firmly tighten the two 1 3/4” Bolts (76).
3
4. Lower the treadmill Frame (59) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21). With the help
of a second person, carefully tip the Uprights (97) down
as shown.
Firmly tighten the two Nuts (20) on the 3” Bolts (86).
4
89
99
97
76
86
86
71
71
20
20
71
59
97
20
20
59
86