Precor M9.2s Treadmill User Manual


 
page 25
5. Press STOP or SPEED until the running belt comes to a complete stop.
6. Continue with steps 1 through 5 until the belt tension has been properly adjusted and you no
longer feel the pause in the belt with each footplant.
Important: Do not turn the adjusting bolts more than 1/4 turn at a time. Overtightening the
bolts can damage or cause premature failure of the precision bearings in the front and rear
rollers.
Servicing the Treadmill
Do not attempt to service the M9.1 or M9.2s yourself except for the maintenance tasks described
in this manual. The M9.1 or M9.2s does not contain any user-serviceable parts, or parts that
require lubrication. For information about product operation or service, contact an authorized
Precor dealer at 1-800-4-PRECOR.
Power Cord Maintenance
When the M9.1 or M9.2s is in use, ensure that the power supply cord is away from moving parts
and cannot be damaged.
If the M9.1 or M9.2s power supply cord is damaged, it can only be replaced in a repair shop
appointed by Precor because special tools are required.
M9.1 or M9.2s Long Term Storage
When the M9.1 or M9.2s is not in use, ensure that the power supply cord is unplugged from the
wall outlet and is positioned so that it will not become damaged or interfere with other equipment
or people.
There are no special storage requirements for the M9.1 or M9.2s other than ensuring that it is kept
free from dirt, moisture, or damage.
Obtaining Service
Do not attempt to service the M9.1 or M9.2s Precision Electronic Treadmill yourself except for
minor belt adjustments and maintenance as described in this manual. The treadmill does not
contain any user-serviceable parts.
For information about product operation or service, contact an authorized Precor dealer or a Precor
Factory Authorized Service Company. To locate the dealer or servicer nearest you, call 1-800-4-
PRECOR.
To help the customer service representative expedite your call, have your serial number available.
The serial number on the treadmill is written on a label located underneath the treadmill at the left,
rear corner of the running bed frame. If you haven’t already written the serial number in the space
provided below during the assembly process, you will need to get on your knees and bend down to
see it.
Model number: _____ Serial number: ___________________________________________
Model number: _____ Serial number: ___________________________________________
If you have any questions regarding the treadmill, use the model and serial numbers whenever you
call your Precor dealer or servicer.
M 9.1
M 9.2s