Precor EFX 5.25 Elliptical Trainer User Manual


 
Owner’s Manual: Important Safety Instructions 1
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
When using the EFX, always take basic precautions,
including the following:
Read all instructions before using the EFX. These
instructions are written for your safety and to protect
the unit.
Before beginning any fitness program, see your
physician for a complete physical examination.
Il est conseillé de subir un examen médical complet
avant d’entreprendre tout programme d’exercise. Si
vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
To reduce the risk of electrical shock
always unplug the EFX from the
electrical outlet immediately after
using and before cleaning.
To reduce the risk of burns, fire,
electric shock, or injury, take the
following precautions:
Do not allow children or those unfamiliar with its
operation on or near the EFX. Do not leave children
unsupervised around the unit.
Never leave the EFX unattended when it is plugged in.
Unplug the EFX from the power source when it is not
in use, before cleaning it, and before providing
authorized service.
Assemble and operate the EFX on a solid, level
surface. Locate the EFX a few feet from walls or
furniture. Keep the area around the EFX clear.
Maintain the EFX in good working condition. Refer to
the Maintenance section. Routinely check and make
sure that all fasteners are secure.
Use the EFX only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by the
manufacturer, as such attachments may cause injuries.
Never operate the unit if it is damaged, not working
properly, when it has been dropped, or has been
immersed in water. Return the EFX to a service center
for examination and repair.
Keep the power cord and plug away from heated
surfaces.
Do not operate the EFX where aerosol (spray)
products are being used or where oxygen is being
administered.
DANGER
WARNING
52x-V_Owners Manual.book Page 1 Monday, June 2, 2008 4:09 PM