Filter
Top Products
Table 2. Club custom features and settings
Equipment Club Programming Prompt Factory Default
Setting
Changes you can make
Treadmill
SAFETY CODE
Disabled
An enabled safety code requires a 4-digit entry code before users can access any
exercise programs.
All *
SELECT LANGUAGE
English Several languages affect the display prompts. Choose one.
All *
SELECT UNITS
U.S.
Two standard units of measure affect the display prompts. Choose between U.S. or
Metric.
All *
SET MAX WORKOUT TIME
60 minutes
Exercise session time limits range from 1 to 240 minutes.
NO LIMIT
is accessible
beyond 240 minutes.
All *
SET MAX PAUSE TIME
120 seconds
Pause time limits range from 1 to 120 seconds (2 minutes). Restrictions exist for
self-powered equipment.
All *
SET COOL DOWN TIME
5 minutes Cool-down time limits range from 1 to 5 minutes.
Treadmill
SET SPEED LIMIT
Maximum speed
available.
Refer to Treadmill: Determining the Club Speed Limit.
Treadmill
SET INCLINE LIMIT
Maximum grade
possible.
Refer to Treadmill: Setting an Incline Limit.
Treadmill
HIDDEN PROGRAMS
Hide programs Two options are available: Show Programs or Hide Programs. Choose one.
Treadmill
REMOTE SPEED CONTROL
Disabled
A computer must be connected through the CSAFE port to enable this feature and
change the speed or incline for a specific user.
EFX
SET CROSSRAMP AUTO-LEVEL
Mid-level of ramp
incline range
This prompt appears on equipment with adjustable ramps. Settings range from 1 to
20. Refer to EFX: Changing the Auto-Level Setting.
Cycle
SET RESISTANCE RANGE
High
Settings range from High, Medium, and Low. Refer to Cycle: Setting a Resistance
Range.
* This feature is available in all Precor club equipment.
Note: When you make changes in club programming mode, the new settings replace the factory defaults.
Product Owner's Manual: Club Features 15