Filter
Top Products
page 32
COMMERCIAL PRODUCTS DIVISION
CALORIES: Provides the cumulative number of calories being burned by the user.
INCLINE: Displays the selected percent of incline during a workout. The INCLINE ▲
and ▼ keys affect the treadmill’s lift and let the user set an incline between 0 percent
and 15 percent. The displayed values change in 0.5 percent increments. Refer to
INCLINE ▲▼ keys on page 33.
When the INCLINE field is selected and the target incline changes, the target
incline continues to be displayed as the lift moves to the new incline level. A few
seconds after the lift reaches the requested incline, the display no longer appears.
Note: To check the incline (when it is not the chosen display) any time during a
workout, lightly press either INCLINE ▲ or ▼ key for less than two seconds. If a
user presses the INCLINE ▲ or ▼ key for more than two seconds, the treadmill’s
incline will change.
PROFILE: At the beginning of a program, the profile appears on the right side of
the display and corresponds to the program that the user selected. As the user
proceeds through his or her workout, the position in the program is indicated by a
blinking column. The height of the column indicates the level of incline. Every
time the incline changes by several sequential levels (up or down) the height of
the column changes by one cell.
CALORIES PER MINUTE: Indicates the approximate number of calories being
burned per minute.
METS: Displays the metabolic equivalents associated with a user’s current energy
expenditure level. A METS level of 1 represents the body at rest. Note that when
the running belt stops moving, the METS value displays zero.
SPEED: Displays the running belt’s speed. The running belt speed ranges from
0.5 to 11 mph (1 to 18 kph), but a maximum speed can be set by the club (see
Club Information
on page 23). The SPEED ▼▲ keys let a user decrease or
increase the running belt’s speed in 0.1 increments.
Important: To check the speed (when it is not the chosen display) any time
during a workout, the user can lightly press either SPEED
▼
or
▲
key (for less
than two seconds). The running belt’s speed appears in the right portion of the
display. If a user presses the SPEED
▼
or
▲
key for more than two seconds, the
treadmill’s speed will change.
PACE: Displays the user’s target speed in minutes and seconds per mile
(or kilometer). The user’s pace appears in the TIME field when the SPEED indicator
is
not
lit and the user taps the SPEED ▼ or ▲ key.