Precor 966i Treadmill User Manual


 
EFX: Changing the Auto-Level Setting
1.
2.
3.
You can set a specific ramp incline so that the EFX automatically
returns to it at the end of a workout session. Whatever incline you
set, the EFX ramp returns to the setting if a user continues
pedaling, once the program session has ended, and presses
RESET to return to the Precor banner.
Note: This setting is available on equipment with adjustable ramps.
Important: If you use this feature, connecting the optional power
adapter is recommended. Instruct users about the auto-leveling
feature and ask that they hold onto a stationary handrail with one
hand while the equipment automatically moves to the set incline.
At the
SET CROSSRAMP AUTO-LEVEL
prompt, press OK.
XRAMP
n appears, where n is the ramp incline setting. Some
displays only show a number without prefacing it with
XRAMP
.
Use the navigational arrow keys to select the desired ramp
incline setting from 1 to 20.
When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in Accessing Club Programming Mode and Changing the
Settings.
Product Owner's Manual: Club Features 26