Precor 842i Treadmill User Manual


 
Table 2. Club custom features and settings
Equipment Club Programming Prompt Factory Default
Setting
Changes you can make
Treadmill
SAFETY CODE
Disabled
An enabled safety code requires a 4-digit entry code before users can access any
exercise programs.
All *
SELECT LANGUAGE
English Several languages affect the display prompts. Choose one.
All *
SELECT UNITS
U.S.
Two standard units of measure affect the display prompts. Choose between U.S. or
Metric.
All *
SET MAX WORKOUT TIME
60 minutes
Exercise session time limits range from 1 to 240 minutes.
NO LIMIT
is accessible
beyond 240 minutes.
All *
SET MAX PAUSE TIME
120 seconds
Pause time limits range from 1 to 120 seconds (2 minutes). Restrictions exist for
self-powered equipment.
All *
SET COOL DOWN TIME
5 minutes Cool-down time limits range from 1 to 5 minutes.
Treadmill
SET SPEED LIMIT
Maximum speed
available.
Refer to Treadmill: Determining the Club Speed Limit.
Treadmill
SET INCLINE LIMIT
Maximum grade
possible.
Refer to Treadmill: Setting an Incline Limit.
Treadmill
HIDDEN PROGRAMS
Hide programs Two options are available: Show Programs or Hide Programs. Choose one.
Treadmill
REMOTE SPEED CONTROL
Disabled
A computer must be connected through the CSAFE port to enable this feature and
change the speed or incline for a specific user.
EFX
SET CROSSRAMP AUTO-LEVEL
Mid-level of ramp
incline range
This prompt appears on equipment with adjustable ramps. Settings range from 1 to
20. Refer to EFX: Changing the Auto-Level Setting.
Cycle
SET RESISTANCE RANGE
High
Settings range from High, Medium, and Low. Refer to Cycle: Setting a Resistance
Range.
* This feature is available in all Precor club equipment.
Note: When you make changes in club programming mode, the new settings replace the factory defaults.
Product Owner's Manual: Club Features 15