Filter
Top Products
Teach a New Stride Sensor to Your Wrist
Unit
Your new s3 stride sensor must be introduced to
your Polar product in order to analyze your
running technique and efficiency. This is called
teaching. For further information, refer to the
user manual or go to www.polar.fi/support.
Attach Stride Sensor on Shoelaces
1. Undo the flap and detach the fork (see
picture 4).
2. Loosen your shoelaces and place the fork
underneath them, on top of the tongue of
the shoe (see picture 5).
3. Tighten the laces.
4. Fit the front part of the sensor onto the fork
and press from the rear (see picture 6).
Fasten the flap.
5. Make sure the sensor does not move and is
aligned with your foot. The more secure the
sensor, the more accurately speed and
distance is measured.
ENGLISH
2