Filter
Top Products
9-1/ 2"
4
FIGURE 1
STEP 1:
• SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS
(14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 1.
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
12 1/2 X 5”
1
13
17
14
4
5
• SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14),
one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 1. (NOTE: Make sure MAIN ARM is orientated cor-
rectly, top hole should be 9-1/2” from the top of arm as shown in FIGURE 1.)
• NOTE: Follow STEP 1 for the assembly of the LEG PRESS to the 220 and 880 Gym Systems. If you have the 777 Gym
System proceed to STEP 2.
• Proceed to to STEP 3.
• SECURELY assemble two 1” SQ. GLIDES (18) to each side of the MAIN ARM (4) where the MAIN ARM (4) contacts the FRAME
(1) See FIGURE 1.
18
For assembly to the the 220 and 880 Gym Systems .
Make sure MAIN ARM
is orientated correctly