Filter
Top Products
EN
9
3. Press
again to view the activity goal value.
If no key is pressed when the alarm sounds, a
back-up beep will sound again after 5 minutes.
CONNECTING TO YOUR PC
Data can be transferred to a PC directly from the
pedometer or by using the base.
To connect the pedometer to a PC:
1. Insert the USB cable into your PC.
2. Unclip the cover of the USB port on the pedometer.
3. To connect directly to the pedometer: insert the USB
cable into the port on the pedometer.
4. To connect via the base: Insert the USB cable into the
base. Then, place the pedometer onto the base so that
the base USB connector is inserted into the pedometer
USB port.
• When connected, ‘PC’ will appear on the LCD screen
and the LED will be lit.
• When data is being transferred the green LED will
flash.
If connection is interrupted, please remove the
USB cable from your PC and re-insert.
BACKLIGHT / KEYPAD LOCK / RESET
To turn the backlight ON for 3 seconds, press .
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM9