Filter
Top Products
18
TROUBLESHOOTING TIPS
Problem Probable Cause How to Correct
The low battery
indicator blinks or
appears continuously
The battery is low or
worn.
Replace the battery with a new one
(CR2032), refer to “BATTERY
REPLACEMENT”.
Nothing is displayed.
Battery saving mode
active.
Press either of
, or ,
refer to “About the battery saving
mode (sleep mode)” in “READING
THE CURRENT DISPLAY”.
The polarities of the
battery (+ and -) are
aligned in the wrong
directions.
Insert the battery in correct
alignement, refer to
“BATTERY REPLACEMENT”.
The battery is worn
Replace the battery with a
new one (CR2032), refer to
“BATTERY REPLACEMENT”.
The displayed values
are incorrect.
The unit is positioned
incorrectly.
Refer to “The unit may not
count steps correctly in the
following conditions:” in
“USING THE UNIT”.
Irregular movement.
Inconsistent pace. Up
and down movement.
The set values are
wrong.
Check the settings, refer to
“SETTINGS”.
The display is unusual or the buttons do
not operate normally.
Replace the battery with a
new one (CR2032), refer to
“BATTERY REPLACEMENT”.
Device error.
Reinstall the battery, refer to
“BATTERY REPLACEMENT”.
NOTE: If a malfuncion has occurred and you need to repair your unit, all settings
and measurement results are deleted. We recommend that you record
measurement results.