Omega SA 2500 Watch User Manual


 
36
For your own peace of mind and convenience, we rec-
ommend that you have the length and position of
your rubber bracelet adjusted by an authorised OMEGA
service centre.
When adjusting the length of the strap, the clasp
should be set in its shortest position.
1)
Measure the circumference of
the wrist using the flexible
measure, placing the blank end
over the graduated part
.
2)
Remove the metal connectors
from the clasp by pushing in
the two spring pins
.
3) Cut off the two lengths below
the figure corresponding to
the number indicated on the
flexible measure when the
wrist was measured. If there
is any doubt as to the exact
measurement, it is preferable
to cut at the upper gradua-
tion.
Rubber strap
1
2
3
4