Omega SA 1538 Watch User Manual


 
27
English
2.2. Display and correction of the yearly cycle.
Following display of the month (cf. 2.1.), the calendar
continues to function and the year cycle is displayed
in Roman numerals for 8 seconds, (C).
I = leap year +1 Example: 2005, 2009, 2013
II = leap year +2 Example: 2006, 2010, 2014
III = leap year +3 Example: 2007, 2011, 2015
IV = leap year Example: 2004, 2008, 2012
During these eight seconds, you can adjust the year
cycle. To do so, pull the crown out to position 2,
turn the hour hand through one full revolution. The
year cycle will move forwards or backwards.
Repeat the procedure until the required yearly cycle
is displayed. Push the crown back to position 1.
The calendar continues to function and displays the
date, A.
See point 1.3. for how to correct the date.
2.3. Changing the time zone or daylight saving time:
Pull the crown out to position 2 and turn it. Only the
hour hand will move forwards or backwards, without
affecting the minutes or seconds. Push the crown
back to position 1.
NOTE:
The end of battery life is indicated by the seconds hand
making 4-second jumps. The watch will continue to func-
tion for several days, but the battery must be removed
and replaced by an authorised OMEGA service agent as
soon as possible. Once the watch stops, a memory func-
tion stores the date for one month.
Perpetual calendar