Omega SA 1532 Watch User Manual


 
22
Chronograph functions with split seconds:
The split-seconds function allows split times to be recorded
whilst the chronograph is running.
1. Start the chronograph by pressing pusher A (start).
2. To record a split time, press pusher C. The split-seconds
hand D stops, indicating the split time, whilst the
chronograph continues running.
NOTE: The split time should be read immediately, since
the chronograph totalisers for hours G, minutes E and
seconds F continue to measure the elapsed time.
For calibre 3600 only: Whilst the chronograph is run-
ning, do not leave the split-seconds hand D stopped
any longer than is necessary to read the split time,
otherwise the functioning of the split-seconds mech-
anism may be affected.
3. Press pusher C for the split-seconds hand to catch up
with the chronograph seconds hand F.
4. To record a new split time, start from step 2 above.
5. Press pusher A to stop the chronograph.
6. Press pusher B to reset.
NOTE: The split-seconds hand D must have caught up
with the chronograph seconds hand F, as explained in
step 3 above, before the chronograph is reset.
Self-winding split seconds chronograph