Filter
Top Products
8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Remove the tie from the Upright Wire Harness
(
75).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71). See the inset draw-
ing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
71
Console
Assembly
4
75
Tie
74
5. Insert the brackets on the Handrails (99) into the
Uprights (73, 74).
Make sure that no wires are
pinched.
73
5
74
99
6. Finger tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
Upright (74). Next, finger tighten three Handrail
Bolts with three Star Washers (not shown) into
the Left Upright (73). Then, firmly tighten the six
Handrail Bolts.
73
74
64
64
90
90
75
6
73
99
71