Filter
Top Products
6
5. Operation Instructions
WARNING!
Never operate your night vision device at daylight without
the lens cover on! Never direct the lens to bright light!
5.1. Prior to use
- Unpack the device.
- Switch (9) and (7) (Fig.1) must be in the OFF- position.
- Attach the hand strap if necessary.
- Remove battery compartment cover (5) by sliding it out;
- Insert 2 AA batteries in the battery compartment observing
correct polarity as shown at the bottom of the battery -
compartment
- Close the battery compartment cover (5).
- PYGMY 2M is ready for operation
5.2. Testing of operation
Turn on the device-using switch (7). Lens cap (4) must be on.
Direct the device to an object placed within 10 – 20 m from
the viewer. Image will appear in green. Achieve the sharpest
image on the screen by rotating the eyepiece (3). For close
focusing rotate the front lens (2)