Filter
Top Products
17
The unit is fixed to the mount by a locking screw (1, Fig.
7). To adjust the position of the unit to your eye level, use
the screw (4, Fig. 7). To adjust the eye relief first loosen
locking screw (1, Fig. 7) and set a comfortable distance
between the eyes and the eyepiece; then tighten the
locking screw back.
You can fixate the unit in three predetermined positions:
vertical, horizontal, and 15-20 degrees above horizontal.
Although the relative angles between these positions
cannot be changed, the starting point can be adjusted by
screws (3, Fig. 7). If you loosen them, you can rotate the
flip-flop mechanism to find the suitable starting point.
Tighten the screws (3, Fig. 7) after the adjustment.
You can raise the unit for unobstructed view without
taking the helmet off. To do so press (and hold) the button
(2, Fig. 7) and rotate the unit until you hear a click.
All other operations with the unit mounted on a helmet
are identical to those with the headgear.