Filter
Top Products
17
Minimal gating distance of 000 m will be initially set, further
pressing M button will increase gating distance by 100 m up to
2,100 m. When the desired distance is reached – select it by
pressing Action button.
OVER 100M – indicates that gating is active
To deactivate gating choose gating value zero or switch to the
default mode.
Note: The gating distance can only be increased. To exit the
gating selection cycle without setting any gating distance click
through full gating range with M button or hold M button for 2
seconds.
Gating feature helps measure remote targets in unfavourable
atmospheric and environmental conditions by eliminating
reflections from snowflakes, raindrops, industrial wires, tree
branches, etc. At the same time, if gating distance is set
incorrectly, you can remove the desirable object from
measurement range.
Individual Measurement and Scanning regimes
The unit can operate in two regimes: (1) Individual Measurement
and (2) Scanning. In Individual Measurement regime the unit
performs single measurement when A button is pressed shortly,
in Scanning regime the unit repeatedly measures and displays
results every second while A button is pressed.
Scanning or Individual Measurement regimes are available for
any selected mode of measurement. When two parameters are