Newcon Optik LRM1200 Binoculars User Manual


 
13
KMH/MPH: units of speed measurement: km/hour or
miles/hour (3, Fig.3) (LRM 1500SPD only).
Shape of the reticle: cross shape or rectangular shape (2, Fig.3).
rEC1: Data Recall mode. It returns results of the last 10
measurements on the display.
Measurement results are saved in on-board memory. When you
enter the Data Recall mode, first measurement set number
(display name:
rEc 1) will start flashing.
Pressing M button moves the unit along the list of measurement
set numbers and measurement results:
rEc 1, rEc 2, …, rEc 0.
If distance was not measured, it will not appear in the list.
Measurement sets are numbered in reverse order: first recalled
set is the result of the last measurement.
Pressing A button at any moment within the list of recalled
results (or pressing M button at the end of the list) brings the unit
to Ready to Measure mode.
Clr: clear data function: upon pressing the Action button (6)
(fig.1) the entire data from all previous measurements will be
erased.