Filter
Top Products
2. Range Finder
Type
Measuring Range, m
Accuracy, m
Resolution, m
Measurement time, sec
Meters/Yards display
Last 10 readings recall
Reticule shape ( + or □)
Target quality indicator
Scan Mode
Speed Finder
Class 1 eye safe, 905nm
20-1,512
±1 ± 0.1%
1
<1
Yes
Yes
Optional
Optional
Yes
LRB 7x50 SPD only
3. Miscellaneous
Battery
Battery capacity
'Low Battery' Indicator
Covering
Construction
Tripod thread
Operational Temperature
Range
Storage Temperature Range
Shock, g
Vibration, Hz
Dimensions, mm
Weight, kg
Standard 9v
>3000
Yes
Rubberized
Water resistant
1/4"x20
-30 / +55
o
C
-45 / +85
o
C 65
5 – 500
210x150x80
1.300
- REC 0 will show instead of REC10
- If a position is empty then 4 dashes (----) will be displayed
- After REC 0 the demonstration will restart with REC 1,
REC2, and so on
2) If the last measurement was that of speed, then the speed will
show in
REC1; the distance of the vehicle will show in REC2 and so on.
3) The self test procedure was completed properly if:
- The square and cross reticle are flashing alternately
- The lightening power symbol, reticle , square, 7 segment
numbers, KMH and MPH segments on the screen are
visible.
Y/M – units of measurement: yards or meters (3).
KMH/MPH – units of speed measurement: km/hour or miles/hour
(3). Please note: only on LRB 7x50 SPD.
Shape of the reticle: cross shape or rectangular shape (2). Please
note: this is an optional feature.
rEC1 - recall function. Upon pressing the Action button (6) (fig.
1) the Display will sequentially show results of last 10
measurements, starting from the latest one. The number appearing
after word "REC" shows the number of the measurement counted
back in the sequence. When the System is in inactive state the 10
previous measurements are stored within the System and may be
recalled any time.