Filter
Top Products
The image should be restored in within 2 minutes.
Poor atmospheric conditions such as fog, haze or extremely
dark environments, will decrease the visibility distance of
the unit.
9. WARRANTY:
NEWCON OPTIK warrants this product against defects in
material and workmanship for one year from the date of the
original date of consumer's purchase, but no more than 18 months
from the date of manufacturing. Should your NEWCON product
prove defective during this period, please bring the product
securely packaged in its original container or an equivalent, along
with proof of the date of original purchase, to your NEWCON
Dealer. NEWCON will, repair (or at its option replace), the
product or part thereof, which, on inspection by NEWCON, is
found to be defective in materials or workmanship.
What This Warranty Does Not Cover:
NEWCON in not responsible for warranty service should the
product fail to be properly maintained or fail to function properly
as a result of misuse, abuse, improper installation, neglect,
damage caused by disasters such as fire, flood, lightning,
improper electrical current, or service other than by a NEWCON
Authorized Service. Postage, insurance, or shipping costs
incurred in presenting your NEWCON product for warranty
service are your responsibility. Please include a cheque or money
order made out to NEWCON OPTIK for the amount of US$7.50
to cover shipping and handling.
NEWCON OPTIK may replace any product that has
been discontinued or is out of stock, by another current product
of comparable value and function.
14
1. IMPORTANT INFORMATION
Read prior to activation
You have just purchased a complicated
electronic device. To operate it properly, please
read this manual carefully. Here are some
common precautions that must be noted.
•
NEVER disassemble the unit. This device
contains high voltage, which may be
hazardous to your health!
• NEVER expose the opened objective lens of
an active unit in daylight. (Note: 1st
generation units will still remain active for a
few minutes after switching the unit off). At
daytime objective lens must be covered by
caps. There is a tiny hole in the cap to
provide enough light for day time operation.
It is allowed to turn on the unit at daytime,
but the lenses must be covered by caps.
3