Filter
Top Products
5
OVERBLANKET
• Your overblanket should, as the
name suggests, be used
ABOVE, not underneath, the
occupant of the bed. It can be
used either under a duvet or one
or two blanket covers. It can
also be used inside the duvet
cover.
• This product can be used with
any type of bedding, including
waterproof bed protectors.
Under the duvet
cover
1 The bed should be made as
normal, with a bottom sheet
covering the mattress then a top
sheet above the bed occupant,
then the heated overblanket,
then the duvet or covers A.
2 Fold the top sheet over the top
edge of the blanket and tuck in
the sides.
WARNING: Do not fold over
the top part of the blanket
or tuck in any wired parts.
Inside the duvet cover
The overblanket is designed to
enable it to be placed inside the
duvet cover with a duvet of up
to 12.5 tog if desired.
1 It should be carefully inserted
into the duvet cover BELOW the
duvet, ensuring that it is spread
smoothly and that there are no
folds in the overblanket B.
2 Securing loops are provided
along the top edge of the
overblanket. These can be used
to sew it to the duvet with a
simple stitch to help prevent the
blanket from moving inside the
duvet cover.
• If the duvet cover is smaller than
normal size, it is permissable for
the side edges of the
overblanket (no more than 3” or
75mm) to be folded over to
allow it to fit inside the duvet
cover.
WARNING: On no account
should the central, heated
area of the blanket be
folded for this purpose. The
electric lead should be
located at the open end of
the duvet cover at the
bottom of the bed.
A
Heated overblanket
B
Heated overblanket
75310 rev2 11/1/08 15:33 Page 6