Meade Binocular and Digital Camera Binoculars User Manual


 
2. Insert 2 AA 1.5v (user-supplied) batteries into the compartment, noting the
correct polarity as illustrated inside the compartment.
Moving through the menus
Press and hold the Menu button (4, Fig. 1) for 3 to 5 seconds to turn on the
camera. Press the Menu button to display the menus. Use the Right and Left
buttons to move the red selection box over menus or menu options. When the
box is over the menu or menu option you wish to select, press the Menu but-
ton. The following example demonstrates how to use these buttons. See Part
IV, Menus, for a description of the menus and images their on-screen icons.
Taking Pictures
1. Lift up the LCD (8, Fig. 1) to an upright position. Press and hold the
Menu button (4, Fig. 1) for 3 to 5 seconds to turn on the camera.
Point the binoculars and you will see images appear on the LCD.
2.Press the Menu button again and the first menu screen displays on
the LCD. Use the Right or Left buttons (6 or 7, Fig. 1) to move the
red selection box over the Resolution menu (the "2M" icon) and
press the Menu button to display the Resolution menu. Use the
Right or Left buttons to move the red selection box to the desired
Resolution option. Press the Menu button to select the option and
the main menu displays again. See R
ESOLUTION OPTIONS for the
resolution choices that are available with your CaptureView model.
3.Use the Right or Left buttons to move the selection box over the
Camera menu (the Camera icon) and press the Menu button to dis-
play the menu. Use the Right or Left buttons to move the red selec-
tion box to the Digital Still Camera (DSC) option. Press the Menu
button to select the option and the main menu displays again.
4. Use the Right or Left buttons to move the selection box over Exit
and press the Menu button to exit the menu mode.
5. Sight on a target by looking through the binocular eyepieces or by
looking at the LCD.
6. Hold CaptureView steady and press the Shutter button (5, Fig. 1). A
beep sounds to confirm that a picture was taken. The counter in the
upper right corner of the LCD increases by one.
Note: Be careful to hold the camera steady while taking a picture in
the higher resolution modes (see
RESOLUTION OPTIONS, next page).
The camera is more sensitive to motion in this mode.
To playback your captured images:
7. To see the image(s) that you have captured, move the selection box
to the Playback menu (the right pointing triangle icon) and press the
Page 4
Meade DB5 I Book.qxd 6/23/03 1:34 PM Page 4