Filter
Top Products
4 SERVICE AND TECHNICAL DATA
4.1 PREVENTATIVE
MAINTENANCE TIPS
The cross-trainer is backed by engineering excellence and is one of the most rugged and trouble-free pieces of exercise equip-
ment on the market today. The manufacturer’s products have proven to be durable in health clubs, colleges, military facilities,
and other locations the world over. This same technology, engineering expertise, and reliability have gone into the cross-train-
er.
NOTE: The safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
If maintenance is required, keep the equipment out of use until defective parts are repaired or replaced.
Pay special attention to parts that are subject to wear as outlined in the Preventive Maintenance Schedule.
The following preventive maintenance tips will keep the cross-trainer operating at peak performance:
• Locate the cross-trainer in a cool, dry place.
• Clean the top surface of the pedals regularly.
• Keep the display console free of fingerprints and salt build-up caused by sweat.
• Use a 100% cotton cloth, lightly moistened with water and a mild liquid cleaning product, to clean the cross-trainer.
Other fabrics, including paper towels, may scratch the surface. Do not use ammonia or acid-based cleaners.
• Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection
buttons on the console.
• Clean the housing thoroughly on a regular basis.
NOTE: A non-abrasive cleaner and soft cotton cloth are strongly recommended for cleaning the exterior of the unit.
At no time should cleaner be applied directly to any part of the equipment; apply the non-abrasive cleaner
on a soft cloth, and then wipe the unit.
11