Filter
Top Products
SM10 Unpacking & Assembly Instructions
7
HARDWARE
Hardware Figure 1. Assembly Parts.
The parts shown in Hardware Figure 1 are used to assemble the SM10. They are:
A. 7/16” x 5” hex head bolt (2)
B. 7/16” flat washer (2)
C. 7/16” cap washer (use on head end of the 6” bolt so end cap will fit on the nut) (2)
D. 7/16” hex head nut (2)
E. End caps (bolt covers) (2)
PARTS LIST
Part # ID Description Quantity
Main components
1-stack cell 1
0017-00101-
0017-00104-0363
0017-00104-0366
0017-00103-0233
0017-00042-0969
5” bolt hardware
A
B
C
D
E
7/16” x 5” hex head bolt
7/16” flat washer
7/16” cap washer
7/16” Nyloc nut
End caps
2
2
2
2
2
Handle and bar
hardware
Safety carabiner
Crossover handle
Leg strap
2
1
1