Filter
Top Products
Signature Adjustable Decline Bench
©
2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.
Life Fitness is a registered trademark of Brunswick Corporation.
SADB 1/12/07 8183801 RevA-1
5. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BACK FRAME
(7) using the ADJUSTMENT PIVOT SHAFT (15). Secure the ADJUSTMENT
PIVOT SHAFT using two M10 X 40mm BOLTS (16) and two ADJUSTMENT
PIVOT SPACERS (17) as shown. Tighten the BOLTS securely.
6. Attach the BACK FRAME (7) to the BASE FRAME (11) using the one PIVOT
SHAFT (14). Secure the PIVOT SHAFT using two M10 X 25mm BOLTS (3)
and two 3/8" SAE WASHERS (9) as shown. Tighten the BOLTS securely.
7. Install 1" HOLE PLUGS (18) into all open bolt holes.