Filter
Top Products
10
18
C
D
B
2
18
10
1
E
B
13
F
10
D
H
1. Before proceeding, familiarize yourself with the parts of the
Stairclimber and make sure that you have received all the items
described in the Parts List.
2. Locate the MONOCOLUMN (#10). Position the MONOCOLUMN
SHROUD (#18) onto the MONOCOLUMN as shown. Position the
MONOCOLUMN near the MONOCOLUMN MOUNTING BRACKET
(B) as shown. Detach and feed the CONSOLE WIRE HARNESS
(C) through the MONOCOLUMN and out through the DISPLAY
CONSOLE MOUNTING BRACKET (D) ACCESS HOLE. Pivot the
MONOCOLUMN upright and position the locating slot at the
bottom of the MONOCOLUMN onto the pre-installed LOCATING
BOLT (E) on the MONOCOLUMN MOUNTING BRACKET. Align
the mounting holes of the MONOCOLUMN and MONOCOLUMN
MOUNTING BRACKET and secure them together using two
MOUNTING BOLTS (#1) and LOCKNUTS (#2). Leave the BOLTS
and NUTS loose at this time. Lower the MONOCOLUMN
SHROUD until it rests on the MAIN SHROUDS.
CAUTION: BE CAREFUL NOT TO PINCH THE WIRE HARNESS
WHEN ASSEMBLING THE MONOCOLUMN (#10) TO THE
MONOCOLUMN MOUNTING BRACKET (B).
3. Align and insert the HANDLEBAR ASSEMBLY (#13) into THE
HANDLEBAR BRACKET TUBE (F) as shown until the mounting
holes in the HANDLEBAR ASSEMBLY align with those of the
HANDLEBAR BRACKET TUBE.