Filter
Top Products
7
STEP 1:
Assemble the BACK PAD (1) to the BACK PAD BRACKET
(2) using four M10 x 30mm SCREWS (3) and four 3/8”
SAE WASHERS (4). Tighten the SCREWS securely. Do
not over-tighten the SCREWS.
Attach the BACK PAD BRACKET (2) to the BASE
FRAME (5) using two SEAT PINS (6). Be sure the SEAT
PINS are fully engaged through the opposite side of the
BASE FRAME.
STEP 2:
Assemble the SEAT PAD (7) to the SEAT PAD BRACKET (8) using two M10 x
30mm SCREWS (3) and two 3/8” SAE WASHERS (4). Tighten the SCREWS
securely. Do not over-tighten the SCREWS.
Attach the SEAT PAD BRACKET (8) to the BASE FRAME (5) using one
SEAT PIN (6).
Be sure the tab (A) of the SEAT PAD BRACKET (8) is positioned
under the MAIN BASE FRAME TUBE (B).
Be sure the SEAT PIN is fully engaged through
the opposite side of the BASE FRAME.
1
4
3
4
3
5
2
6
6
7
8
6
4
6
3
A
B