Filter
Top Products
9
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 8. Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 7
3
2
6
SEAT FRAME
FIGURE 7
STEP 7:
6
SEAT FRAME
• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (10), two 3/8”
WASHERS (5), and two 3/8” LOCK NUTS (6). See FIGURE 7.
BRACKET
5
10
3/8 LOCK NUT
3/8 X 4-3/4”