Filter
Top Products
2.3 INSTALLING
UPRIGHTS AND HANDLEBARS
Locate the left upright (1). Position the left upright near the left upright bracket and attach the wire connectors that lead
from the bottom of the left upright and the left upright bracket. Be sure the connectors are fully seated together. Feed
any excess wire into the hollow inside the left upright.
Put the uprights in their brackets by first inserting them at an angle tilting away from the treadmill, then fitting their upper
rectangular slots over the bracket’s tabs (A) and straightening them, then lowering them fully into position. Secure the
left upright to the left upright bracket using three M8 x 60mm bolts (2) and three star washers (3). Leave
the bolts finger-tight at this time.
CAUTION: Do not pinch the wire when attaching the left upright to
the left upright bracket.
Secure the right upright (4) to the right upright bracket
using three M8 x 60mm bolts (2) and three star wash-
ers (3). Leave the bolts finger-tight at this time.
10