Filter
Top Products
7
1.2 SETUP
Read the entire Operation Manual before setting up the Lifecycle Exercise Bike.
WHERE TO PLACE THE LIFECYCLE
®
EXERCISE BIKE
Following all safety instructions in Section 1.1, move the bike to the location in which it will be used. See Section 7,
titled Specifications, for the dimensions of the footprint. Allow a distance of 8 to 12 inches, or 21 to 30 centimeters,
between the bike and other objects or surfaces on either side. Allow a distance of 3 feet, or 1 meter, from the front
or rear of the bike to any other object or surface.
HOW TO STABILIZE THE LIFECYCLE EXERCISE BIKE
After placing the bike in position, check the unit’s stability by attempting to rock it in all directions. Any slight rocking
indicates that the unit must be leveled. Determine which foot is not resting completely on the floor. Loosen the jam
nut with an open-end 9/16-inch wrench, and rotate the stabilizing foot to lower it. Verify that the bike is stable, and
repeat the adjustment as necessary until the unit no longer rocks. Lock the adjustment by tightening the jam nut
against the stabilizer bar.