Filter
Top Products
Dual Adjustable Pulley
1. Assembly Instructions
1. LOOSELY assemble REAR CROSS SUPPORT (1) to the LEFT and RIGHT TOWERS
(2 & 3) using eight RH CAPS (4), four 3/8 X 67mm BOLTS (5), eight 3/8" SAE
WASHERS (34), eight 3/8" RH WASHERS (7) and four 3/8" LOW HT LOCK NUTS
(8) as shown.
2. LOOSELY assemble TOP CROSS SUPPORT (9) to the TOWERS (2 & 3) using four
3/8 X 67mm BOLTS (5), eight 3/8" FLAT WASHERS (6) and four 3/8" LOW HT
LOCK NUTS (8) as shown.
98
6
2
5
6
4
34
3
34
4
7
5
1
2
8
7
3