Life Fitness C1 Exercise Bike User Manual


 
3.8 ASSEMBLE THE HANDLEBAR
Parts: Hardware Bag #6 (4, 15mm Button Head Screws)
(4, Flat Washers)
Tools: 5mm Hex Head Wrench
Locate the HANDLEBAR ASSEMBLY (CC). With the handlebars facing forward, position the HANDLEBAR ASSEMBLY
near the top of the MONOCOLUMN (E). Connect the WIRES (DD) leading from the HANDLEBAR ASSEMBLY and the
MONOCOLUMN. Slide the HANDLEBAR ASSEMBLY fully into the MONOCOLUMN. Secure the HANDLEBAR ASSEM-
BLY to the MONOCOLUMN using four 15 mm BUTTON HEAD SCREWS (14) and matching FLAT WASHERS (15).
Tighten the SCREWS securely.
CAUTION Be careful not the pinch the WIRES (DD) when sliding the HANDLEBAR ASSEMBLY (CC) into the MONO-
COLUMN (E). Insert the ENDCAP (KK) into the CONSOLE BRACKET TUBE (LL).
13