Life Fitness 9SI Stepper Machine User Manual


 
6.2 INSPECTING AND CLEANING THE STAIRCLIMBER
Follow the schedule below to ensure proper operation of the product.
6.3 TROUBLESHOOTING THE LIFEPULSE SYSTEM SENSORS
If the heart rate reading is erratic or missing, check the following:
Dry moist hands to prevent slipping.
Apply hands to all four sensors, two in each hand.
Grasp the sensors firmly.
Apply constant pressure around the sensors.
Clean the sensors with a damp cloth.
6.4 TROUBLESHOOTING THE POLAR HEART RATE CHEST STRAP
HEART RATE READING IS ERRATIC OR ABSENT ENTIRELY
Repeat the electrode moistening procedure. See Section 3.2, titled Heart Rate
Monitoring for details. The electrodes must remain wet to pick up and transmit
accurate heart rate readings.
Make sure the electrodes are flat against the skin.
Wash the belt transmitter regularly with mild soap and water.
Make sure the chest strap transmitter is within three feet (91 centimeters) of the heart
rate receiver.
The chest strap is battery-operated and will stop functioning when the battery runs out.
Contact Life Fitness Customer Support Services for instructions on how to have the
chest strap replaced. See Section 6.4, titled How to Obtain Product Service.
HEART RATE READING IS ERRATIC OR EXTREMELY HIGH
If the chest strap is worn near sources of electromagnetic signals, these signals may be strong
enough to elevate heart rate readings. Possible sources include:
Television sets and/or antennas, cell phones, computers, cars, high voltage power lines
and motor driven exercise equipment.
Another heart rate transmitter within three feet, or one meter, may also cause abnormal
heart rate readings.
32
Follow the schedule below to ensure proper operation of the product.
ITEM WEEKLY MONTHLY BI-ANNUALLY ANNUALLY
Display Console CI
Console Mounting Bolts I
Accessory Tray CI
Frame CI
Plastic Covers CI
KEY: C=Clean; I=Inspect