Filter
Top Products
5.2 C
ONFIGURATION SETTINGS
CONFIGURATION FACTORY
SETTING DEFAULT DESCRIPTION
LANGUAGE ENGLISH The language of the MESSAGE CENTER display. Choices
include Portugese, Spanish, Dutch, Japanese, Italian, French,
and German.
MAXTIME SETUP OFF This feature enables fitness club managers to set workout
duration limits during peak and non-peak hours of club traffic.
If the setup is off, no duration limits are set. See the topic
titled Using the MaxTime
TM
Setup, which appears on the
following page.
STANDBY MODE SETUP OFF This feature enables fitness club managers to set periods at which the
treadmill automatically powers up or powers down. See the topic entitled
Using the Standby Mode Setup, which appears on a following page.
ENGLISH/METRIC UNITS ENGLISH The measurement unit type for weight, distance, and speed.
CUSTOM WORKOUT ENTRY N/A See Programming Custom Workouts in Section 4.
TELEMETRY ON Switching on the telemetry feature makes it possible to use the
Polar®-compatible Heart Rate Zone Training exercise chest
strap for monitoring the heart rate.
SMART STOP ON This feature automatically pauses the workout if the user steps
off the belt.
MAXIMUM SPEED 12.0 (MPH) for 95Ti This is the fastest speed at which the treadmill can operate.
15.0 (MPH) for 97Ti
MINIMUM SPEED 0.5 (MPH) This is the slowest speed at which the treadmill can operate.
PAUSE TIMEOUT 1 (minute) This is the maximum time during which a workout can remain
in pause mode.
WATTS DISPLAY OFF (Int'l: ON) If this option is enabled, the MESSAGE CENTER displays the
Watts equivalent of the step rate.
METS DISPLAY OFF If this option is enabled, the MESSAGE CENTER displays the
METs equivalent of the step rate.
PACE DISPLAY ON This feature displays the rate of minutes per mile.
CALORIE PER HOUR DISPLAY ON (Int'l: OFF) If this option is enabled, the MESSAGE CENTER displays the
number of calories burned per hour during the workout.
DISTANCE CLIMBED DISPLAY OFF The total distance climbed, based on the incline and speed of
the treadmill.
WAX REMINDER OFF After the first 100 hours, then every 168 hours, the MESSAGE
CENTER displays, "MAINTENANCE REMINDER - CLEAN
THE NOZZLE."
ACCELERATION RATE 3 The rate at which the treadmill accelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
DECELERATION RATE 3 The rate at which the treadmill decelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
ERASE CUSTOM WORKOUTS N/A This option erases all custom workouts in a single step.
MAXIMUM INCLINE 15.0 This option changes the maximum incline grade to a value
lower than 15 percent.
START MESSAGE SETUP N/A See “Using the START MESSAGE Setup” in this section.
QUICK START DISABLE OFF Use this option to disable or enable QUICK START workouts via the
numeric keys. See “Using QUICK START Disable” in this section.
FIT TEST PLUS ON (Int'l: OFF) Enable/Disable Fit Tests: Army PFT; Navy PRT; Marines PFT;
Gerkin protocol; PEB
38